Canon IP2770 Cara Repair dan reset

Resetter Canon ip2770 Error 006

Resetter Canon ip2770 Error 006 No matter how you use the printer, but sooner or later the error problem can not avoid. Well to keep watch so that if one day your printer is problematic in this case specifically for the Canon PIXMA iP2770 type, Software Resetter and Reset on how to do this printer you can download and learn. It was counted to reduce the cost of service fees at some point if you are having problems error on Canon PIXMA iP2770 Printer 

for download Resetter Canon ip2770 Error 006 Her click here

Login to the Service Mode iP2770 :

• Turn off the printer first and then let the power cord still attached on electricity .
• Press and hold the RESUME button , ( Do not Removable )
• Then press and hold the POWER button until the green light on ( when pressing the POWER button , Resume button ... jgn removed first )
• Then release the RESUME button , but do not release the POWER button .
• While the POWER button is still depressed , press the Resume button 5 times . Led will light turns green to orange last flame orange . ( not to be mistaken 4x because the printer will die in total , but also temporary ) Purpose of death while if 4x is pressing for about 30 minutes the condition of the printer can not be in anything apain , unplug all the cables are plugged in and after 30 minutes the printer can revived .
• Release both buttons simultaneously .
• Led will blink briefly then will flash GREEN .
• The computer will detect a new device , ignore it .....
• This situation shows the iP2770 printer is in a state of SERVICE MODE and ready to be reset .

Then run Resetter iP2770 his v1074: 

• File Exctract Resetter iP2770. 
• 2 Prepare the paper in the printer (to print at the time the reset process). 
• Run the program Resetter iP2770

• Click the "PLAY", then the printer will proceed, then iP2770 will print one page with the words( "D = 000.0" )
• Click the "Clear EEPROM". 
• Then click "EEPROM", and the printer will print the results Resetter iP2770. One of his row as follows: "TPage (TTL = 00000)" 
• Turn off the printer by pressing the POWER button. 
• Up here if all goes well, it's too Printer will reset and is back Normal.

01.30 Share: